|
The SimPact 4T filter is characterized by a cylindrical design and an efficient pulse-jet system, automatically cleaning the filter bags in rows during operation. The filter is designed for continuous operation with a low pressure drop.
|
 |
The SimPact 4T filter holds remarkable qualities for separation of dry as well as sticky dust particles. The filter is an economical solution for dust collection in industrial plants, and the investment is often paid back in terms of product recovery. The filter is designed to operate with dust explosion vents according to the German VDI 3673 guidelines, alternatively the European Standard EN 14491. The design of the filter housing and the inlet zone ensures a smooth flow of coarse particles as well as fine dust particles into the filter.
The 4T concept of combining the ideal filter unit with either of the five inlet designs, renders the solution to almost any separation job. Filters with standard control unit have a mechanical pressure gauge indicating the pressure drop across the filter bags. The optional, extended control unit is, however, equipped with a differential pressure transducer displaying the pressure drop by LEDs on the filter control board. The extended control adjusts the cleaning frequency to the actual pressure drop, keeping the pressure drop at a constant level. Thus the consumption of compressed air is minimized and the emission values improved.
|
|
| Special features: |
| |
|
|
 |
|
Capacity of 500-130,000 m³/h |
|
|
Up to 50 percent vacuum resistance |
 |
|
Maintenance-free execution |
|
|
Side or top removal of filter bags |
|
|
Control system saving compressed air |
|
|
For dry as well as sticky products |
|
|
Advanced control functions |
|
|
Separation of almost any type of dust |
|
Simatek A/S · All Rights reserved 2011 · Energiens Hus, Energivej 3 · DK-4180 Soroe · Tel. 45 58 84 15 00 · Fax 45 58 85 41 07 office@simatek.dk 
;){kind=small}