The SimPact® 4T-R has a circular design and an efficient cleaning system, automatically pulse-jet cleaning the bags in rows during operation. The SimPact ® 4T-R is applicable for separation of dry as well as slightly sticky dust particles. The filter is delivered in modules in a design adaptable to almost any application and customer request.

|
 |
For explosive dust types, it is equipped with an explosion venting device.The SimPact® 4T-R construction forms 4, 5, 12 and 14 have a 180 gr. tangential inlet ensuring a stable flow behavior around the filter bags. with no risk of "dead corners" or temperature pockets. The SimPact® 4T-R construction forms 12 and 14 have a tangential filter inlet with an integrated, dynamic preseparator. The integrated air distributor and rotation dampers ensure a stable flow behaviour around the filter bags, qualifying the filter for abrasive products. Major part is down-flow filtrated, thereby maintaining a minimum pressure drop and a significant filter capacity. The SimPact® 4T-R construction forms 17 and 17 wide-body have a radial filter inlet with an integrated diffuser system. Independent of the air capacity, a low air velocity into the filter is ensured, thus protecting the filter bags against abrasive dust. The inlet is dimensioned for maximum capacity and is - with no risk of dust depositing - capable of handling unlimited dust loads.
|
 |
Special features: |
|
|
|
 |
|
Capacities from 500 to 60,000 m³/h |
 |
 |
Highly suitable for explosive dust types |
 |
|
Pressure-shock resistance up to 2.0 bar |
 |
|
Manufactured acc. to the ATEX directive and the European standards EN 14491 and VDI 2263 |
 |
|
Indoor installation with explosion vent |
 |
|
Execution for zone 22 installation |
 |
|
Flexible modular system & compact design |
 |
|
Suitable for fine and abrasive dust |
|